|
Code |
Description |
Price |
Delivery |
Stock |
|
 |
PR7639 |
Toolzone Double Brake Pipe Flaring Tool Kit |
£20
Buy 3 for £55.14
3+: £18.38
12+: £16.42
24+: £15.84
48+: £15.40
96+: £15.02
200+: £14.68
500+: £14.35
1000+: £14.04
Hide Prices
|
FREE
Delivery* |
121 |
|
Comprehensive brake pipe flaring set. Suitable for sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8" diameter pipe. For use on aluminium and copper brake tubes. All contained in a handy plastic case for storage when not being used.
Preparing Tubing
1. Cut tubing off square with tubing cutter.
2. Deburr tubing with reamer or reamer blade of tubing cutter.
3. Chamfer the outer edge of the tubing with file or grinding wheel (SEE FIGURE 1). These steps are extremely important for correct flare forming.
Double Flaring
1. Slip prepared tubing through correct size hold in flaring bar. Tubing should extend beyond the surface of the flaring bar to the distance determined by the step on the proper size adaptor laid flat surface down on the flaring bar (SEE FIGURE 1).
2. With tubing extending the correct distance through the flaring bar, tighten the wing nuts firmly. Tighten the wing nut nearest the tubing first, followed by the second wing nut. Insert stem of correct size adaptor into tubing.
3. Place yoke assembly over flaring bar and adaptor so the swivel head meeds depression in the face of the adaptor. U T-handle of yoke assembly to force swivel head down until adaptor rests flat on flaring bar (SEE FIGURE 2). The tubing end should now be formed into a bell shape.
4. Bar off swivel head, remove the adaptor and retighten the swivel head so that bell shape of tubing is folded in on itself (SEE FIGURE 3). This completes a double flare.
Average of
4 stars (based on
20 ratings)
“ My husband has been making brake pipes for car restoration and thought the brake pipe flaring kit purchased was 'just the job'. He found it easy to use and the instructions clear and simple. ”
“ I haven't used it yet, but it's exactly like one I once borrowed and it was great, easy to use and perfect results. ”
Richard from
Buckinghamshire
“ Have done some test flaring which look good, and you will find the instructions on the bottom of the box. ”
“ Instructions could have been a little clearer, but once I worked it out the tool worked very well. ”
“ For general use by DIY person, this product is ideal and good value for money. ”
“ Box says ok for use on steel .Good on copper alloy but not too good on steel . ”
“ Excellent for copper tubing but requires some ingenuity to flare steel tube ”
“ I have since used this tool and it does what it says on the box ”
Amanda from
Tyne And Wear
“ Just what the man of the house needed to help him do the job ”
“ Not used yet. However, as good as any other. ”